Knowledgebase
TimeTrack support > TimeTrack support > Knowledgebase

Search help:


Add Readers / Hardware Devices

Solution

Add Readers

  • Go to Readers -> Add Readers
  • Double click on the appropriate Reader image from the right view.
  • Enter the Reader Name like MainGate1 etc (for your reference) in the ReaderName
  • Choose whether the Reader will be exclusively used for IN Punch or Out Punch or both
  • Enter the IP Address of the Reader.
  • Click GetSerial
  • If the reader is connected correctly, the software will connect to the reader and get the serial number of the reader.
  • Save and continue for the next Reader.
  • Once all readers are completed, you can close this menu and go for Registration.
 
Was this article helpful? yes / no
Related articles ZK InBio Multi door controller
Reader Operations Menu does not open
Data download error - tbl_master_HolidayXX
ZK - Punch/Data download error
Add New Company
Article details
Article ID: 28
Category: Installation
Date added: 16/03/2013 16:09:06
Views: 749
Rating (Votes): Article rated 3.4/5.0 (17)

 
« Go back